DWIL Water-Based Frosted Glass Paint Kit – 16/32 ozWater-Based Frosted Glass Paint Kit – 16/32 oz

The translucent finish softens the view, but privacy changes with lighting, viewing distance and the applied coating. Silhouettes, shadows or movement may still be visible when indoor lights are bright or someone stands close to the glass.

Test the finished result from both sides in daylight and with room lights on at night. If you need to block silhouettes beside a shower, toilet or changing area, use a curtain or blind as well.

Yes. The frosted finish lets light pass through while softening the clear view. You will not retain the same clear view outside, and the effect works from both sides.

Brightness depends on the glass, room lighting and applied coats. More paint can reduce light; apply thin, even coats rather than using a heavy layer to chase complete privacy.

The 16 oz (500 g) kit covers about 25 sq. ft. with 2 coats. The 32 oz (1 kg) kit covers about 50 sq. ft. with 2 coats.

Measure the width and height of each glass panel, multiply to get its area, and add the panels together. Measure the glass only, not the frames. Choose by total glass area rather than a fixed number of windows. Additional coats and application losses reduce coverage.

For residential windows, paint the interior side. On shower glass, use the side with less direct water exposure. Suitable indoor projects include windows, sidelights, glass doors, partitions and glass cabinets.

Do not use outdoors, on food-contact items or for continuous immersion. Confirm plastic, acrylic, plexiglass and specialty-coated glass before application, and test adhesion on a small area.

Clean and degrease the glass, rinse and dry it completely. Mask the edges and stir the paint for 2–3 minutes. Use the roller for long, even strokes from top to bottom.

Apply at least two thin coats, allowing 1.5–2 hours between coats. Avoid heavy buildup and repeatedly working an area as it starts to dry. Test a small section first to check the texture, light and privacy you want.

Keep the finish dry for at least the first 24 hours. Light use after 24 hours is not the same as full cure; allow approximately 7 days before normal use or gentle cleaning.

Drying varies with temperature, humidity and thickness. On shower glass, keep the coating on the side with less direct water exposure. After full cure, use mild detergent and a soft cloth rather than abrasive pads or harsh cleaners.

This is a paint coating, not a peel-off privacy film. The manual describes removal, but the work involved and the effect on the surface depend on the glass, its coatings and nearby finishes. Contact us before attempting removal.

For rented homes, obtain permission and confirm restoration requirements before painting. If easy removal is essential, compare removable privacy products rather than assuming this finish can be peeled away without a trace.

Paint is applied directly to prepared glass and requires drying and curing. Choose it when you want a frosted coating and are comfortable with the preparation and ongoing care.

Film is fitted as a sheet; removal and performance depend on the specific film. Blinds or curtains let you adjust the view and light and can add nighttime screening. Choose by the privacy you need, the glass surface and whether you must restore it later.

Your selected size of Frosted Glass Paint, 2 sanding sheets, 1 pair of disposable gloves, painter's tape, pre-taped masking film, a foam paint roller and a printed instruction manual are included.

Prepare suitable cleaning supplies and surface protection before starting, and follow the manual and SDS for protective equipment and ventilation. Low odor does not mean ventilation is unnecessary.