Tub & Tile Refinishing Kit with Cleaner & Topcoat

DWIL two-step interior floor coating kit

Paint + Topcoat
Gloss Finish
Cleaner + Tools

DWIL Complete Tub & Tile Refinishing Kit with Cleaner & Gloss Topcoat

Color Paint + Clear Topcoat
Gloss Finish
Cleaner Included
Brush & Roller Included

Clean, repaint, and protect—all in one kit. Includes tile cleaner, your chosen paint color, a clear gloss topcoat and application tools.

Color: White

Kit: 1 kg color base + 400 g clear gloss topcoat, with matching hardeners, cleaner and tools.
Coverage: 40–50 sq. ft. with 2 base coats + 1 topcoat.

DIY Friendly

Free U.S. Shipping on $29+

30-Day Return Policy

Help Choosing the Right Product

Designed to refresh suitable indoor tubs, tile walls, floor tile and countertops. Listed surfaces include ceramic and porcelain, concrete, hardwood and laminate, plus acrylic, fiberglass and cast-iron bathtubs.

Start with a sound, clean, dry surface. Repair damage and remove loose or peeling coatings first. For an unknown finish or sealed surface, test adhesion on a small prepared area before coating the whole project.

Clean: Tile & ceramic cleaner for surface preparation.
Paint: 1 kg color base (Part 1a) in your selected color + 20 g matching hardener (Part 1b).
Protect: 400 g clear gloss topcoat (Part 2a) + 80 g matching hardener (Part 2b).

A brush, mixing stick, cleaning pad, roller, gloves, masking tape and masking film are included. All five colors have the same kit contents and coverage. Keep each hardener with its matching coating.

See everything in the box.

One complete kit covers approximately 40–50 sq. ft. with 2 coats of color base and 1 coat of clear topcoat on the same area. Do not add the base and topcoat coverage together.

Measure each area you will coat and add the areas together. Allow for texture, absorption and application losses; these can reduce coverage. For a floor, plan an exit route before starting.

Prepare: Remove dirt, grease and loose material; prepare glossy surfaces as directed. Apply the included cleaner evenly, wait 20 minutes, then rinse with clean water and dry completely.

Color base: Mix 20 g Part 1b into 1 kg Part 1a for 2–3 minutes. Apply 2 coats with a brush or roller, allowing at least 2 hours between coats.

Clear topcoat: Let the base dry for 24 hours. Mix 80 g Part 2b into 400 g Part 2a, then apply 1 even coat. Never swap hardeners or combine all four components.

Allow the topcoat to dry for 20–24 hours. Drying is not the same as full cure: allow 7 days before cleaning. Temperature, humidity and ventilation can change drying times.

Keep the coating protected from water, abrasion and heavy use while it cures. Follow the supplied instructions before bathing, walking on the coating or replacing furniture; the dry-time figure is not a return-to-use guarantee.

After curing, clean gently with a soft cloth and a mild, non-abrasive cleaner. Lift furniture instead of dragging it, and protect the coating from sharp edges.

Color

White Light Grey Dark Grey Black Vanilla White

DWIL Complete Tub & Tile Refinishing Kit with Cleaner & Gloss Topcoat

White

$89.99

DWIL white color base and clear topcoat shown with finished tile and bathtub surfaces.

Ceramic and porcelain tile, concrete, hardwood and laminate examples, with white base and gloss topcoat finishes.

Bathroom countertop, tile wall, bathtub and floor tile application areas.

White color base, clear topcoat, their matching hardeners, cleaner and application tools included in one DWIL kit.

Color Base · Part 1a 1 kg
Base Hardener · Part 1b 20 g
Clear Gloss Topcoat · Part 2a 400 g
Topcoat Hardener · Part 2b 80 g
Tile & Ceramic Cleaner × 1
Paint Brush & Mixing Stick
Cleaning Pad × 1
Paint Roller & Spare Cover
Gloves 1 pair
Masking Tape & Masking Film

Cleaner preparation: clean and dry, roll on cleaner, wait 20 minutes, then rinse and dry completely.

Mix 1 kg white base with 20 g base hardener for 2–3 minutes; brush or roll two coats at least 2 hours apart.

3. Protect with a Clear Gloss Topcoat

1. Let the base dry. Wait 24 hours after the color base coats before topcoating.

2. Mix the matching parts. Add the 80 g Part 2b topcoat hardener to the 400 g Part 2a clear topcoat and mix thoroughly. Do not use the base-coat hardener.

3. Apply one even coat. Spread the mixed topcoat over the same 40–50 sq. ft. area. Allow 20–24 hours to dry and 7 days before cleaning; conditions can affect timing.

How is this different from paint or a clear topcoat alone?

This complete kit brings together tile cleaner, color paint, a separate clear gloss topcoat, matching hardeners and application tools. Clean and prepare first, repaint in your chosen color, then add the clear topcoat for the final protective gloss finish. Both coating stages are included.

What color and finish will I get?

Choose White, Light Grey, Dark Grey, Black or Vanilla White. The color base changes the surface color; the transparent topcoat adds a gloss finish over it. All five colors include the same quantities, matching hardeners, cleaner and tools, and cover approximately 40–50 sq. ft. with two base coats and one topcoat. This is a repainting kit, not a clear-only coating.

Do the two coatings cover different areas?

No. One kit is intended for approximately 40–50 sq. ft. of finished surface: two base coats followed by one topcoat on that same area. Coverage is not 40–50 sq. ft. per coat, and the two stages must not be added together. Texture, absorption and application losses can reduce coverage.

Can I skip preparation because cleaner is included?

No. Remove grease, residue and loose material, repair damaged areas, and prepare smooth or glossy surfaces as directed. Follow the cleaner steps, rinse thoroughly and dry completely. A new coating cannot stabilize loose tile, peeling paint or a leaking substrate.

Can I mix all the components together?

No. Mix the 1 kg color base only with its 20 g base hardener. Apply two base coats and allow the base to dry for 24 hours. Then mix the 400 g clear topcoat only with its 80 g topcoat hardener and apply one coat.

When can I clean or use the coated surface?

Allow 20–24 hours for the topcoat to dry and 7 days before cleaning. Drying is not the same as full cure, and conditions can change the timing. Follow the supplied instructions for bathing, foot traffic and furniture; do not treat touch-dry as permission for normal use. After curing, use a soft cloth and mild, non-abrasive cleaner.

Will it repair cracks or make a floor slip-proof?

The kit refreshes the appearance of suitable surfaces. Repair cracks, loose areas and moisture problems before painting. A gloss finish is not a slip-proof guarantee; take care around wet floors and keep spills cleaned up.

What if I am unsure about my existing surface?

Check the material and the condition of any old coating or sealer. Test adhesion on a small prepared area first. If the surface or existing finish is unknown, contact us with photos and project details before starting.