1.Surface preparation
Our tools are custom-made for water-based paint and easy for novicesto use.
2.Protect surroundings
Use the provided plastic waterproof cloth and masking tape to protectthe surrounding area during application to prevent paint from splatteringonto nearby surface.
3.Add hardener
Pour the hardener (part B) into the ceramic tile paint (part A) andthoroughly mix them together. The mixed paint must be used within 12 hours after adding the hardener. Please note that the paint without thehardener can be stored for a long time. If you need to apply the paintmultiple times, it is recommended to pour out the amount you need eachtime and add an equal amount of hardener. If the paint is too thick, youcan add water to dilute it (less than 5%).
4.Application
Wear gloves and use the roller and brush provided in the tool kit to applyat least 2 coats, with at least 2 hours between each coat. We recommendusing the roller for flat surfaces and the brush for corners and gaps toachieve a smooth and even finish.
5.Remove tape
After completing the application, wait at least 45 minutes beforecarefully removing the masking tape. When removing, use a knife togently cut the tape, and pull it off at a 45-degree angle.
6.Wait for drying
Allow the painted area to air dry for 48 hours before getting wet, and wait 7 days before using the painted area normally. (Do not scratch, scrape,or rub the painted surface during the drying period.)
7.Clean up
After completing the work, please dispose of all unused materials andwaste in a timely manner. Keep away from children, pets, and thosesensitive to paint fumes; follow all city regulations and properly disposeof waste.
