Feature | Value |
Composition | Base resin : Hardener: Colored Sand =5:1:2 |
Item Number | RDE2093 |
Gloss Level | High-Gloss |
Mixed Viscosity @20°C | 5000–9000 mPa·s |
Density | 1.40 ± 0.02 g/cm³ |
Recommended WFT/DFT | 1.4 mm (55 mils) |
Solids by weight | 95% |
Theoretical Coverage | 15–16 sq ft/kg |
Pot life | 30 minutes (25°C) |
Application Temp | 10–30°C (50–86°F) |
Application Time | Touch dry：4 hours |
- Showrooms & retail stores — decorative, durable, high visual appeal.
- Offices & public areas — smooth, easy to clean, long-lasting.
- Light industrial plants & workshops — abrasion & chemical resistant.
- Residential garages & hobby workshops — decorative and tough.
- Sound concrete slabs (new or existing; recommended cure ≥28 days; moisture <10%)
- Cementitious screeds and cement-based self-leveling underlayments (properly cured & dry)
- Shot-blasted, diamond-ground or mechanically prepared concrete surfaces
- Porous mineral substrates (if sound & dry)
- Do not used on:
Wet concrete (moisture >10%), oil-contaminated or chalky weak substrates, asphalt, and non-porous surfaces such as untreated tiles, marble, or glass unless properly prepared (mechanical abrasion or primer/intermediate treatment required). - Self-leveling products are not suitable for vertical surfaces.
- For professional use only
- Do not dilute. This is a 100% solids, solvent-free epoxy system
- Ensure substrate moisture 10% before application. Excess moisture can cause blistering or loss of adhesion.
- Apply only when ambient and substrate temperature are between 10°C – 30°C (50°F – 86°F).
- Avoid application when humidity is high or substrate temperature is within 3°C of dew point.
- Once Parts A+B+C are mixed, use within pot life (~30 minutes at 25°C). Do not mix more than can be applied.
- Do not return mixed material to original containers. Keep unused parts sealed to avoid moisture contamination.
- Wear protective gloves, goggles and appropriate clothing. Ensure adequate ventilation.
Benefits
Industrial-Grade Durability
Withstands heavy loads and frequent traffic
Self-Leveling Formula
Smooth and even finish without trowel marks
Chemical Resistance
Withstands exposure to cleaners, acids, alkalis
Decorative Finish
Colorful quartz blend creates attractive surface
Fast Dry & Easy Application
Quick dry & minimal downtime during renovation
Become a Partner
Leave your info to get a custom quote & product catalog
